1

Kop

170-190

150

With moderate Pressure; Paper should touch mug well; Adjust suitable height of the mug inside the mug heater.

2

Tallerken

180

210-220

1. Plate should be placed as flatly as possible.

2. The Pressure should not be excessive.

3. Time and Temperature should start at the same time. Set the Time as 210 seconds.

4.Choosing“Mirror Effect” when printing pictures

3

Keramisk flise

210

240

1. With moderate pressure

2. The paper should touch the ceramic tile well. The side with picture should face the silicon pad.

3.The picture is suggested to be placed in landscape orientation.

4.Choosing“Mirror Effect” when printing pictures

4

Pearlite Plade

180

100-120

1. The paper should touch the pearlite plate well.

2. The picture is suggested to be placed in landscape orientation.

3. Tear off the surface film before transferring.

4.Choosing “Mirror Effect”when printing pictures

5

Nøglering

(Pearlite Plate)

180

100-120

1.Tear off the surface film before transferring.

2.The picture should touch the pearlite plate well.

3.Choosing“Mirror Effect” when printing pictures

6

T-shirt (Inkjet Transfer Papir -

lys farve)

180-185

20-30

1. Specially for light color T-shirt with 75%-100% cotton

2.Choosing“Mirror Effect” when printing pictures.

3. With more pressure

4.After transferring,tear the transfer paper off the T-shirt immediately (Note: this method is more suitable for cotton cloth)

7

T-shirt (Inkjet Transfer Papir - Mørk farve)

180-185

20-30

1. Specially for Dark color Cloth, such as Black, Red, Green, Yellow.

2. Choosing “Normal Printing” when printing pictures, no need of “Mirror Effect”

3. After printing the picture, tear off the back paper and stick the front soft paper on the T-shirt.

4.Make sure the paper touch the T-shirt well, and the picture should NOT face the T-shirt.

5. When transferring, place the heat-resistant paper( if not, you can use back paper as replacement) over the front paper to protect it. After transferring, carry awaythe heat-resistant paper. Don't peel off that stick paper on the T-shirt.

8

Spejl

(pearlite plade)

180

60-80

1.Tear off the surface film of the pearlite plate before transferring.

2. The Paper should touch the transferring side well.

3.Choosing“Mirror Effect” when printing

4. With more pressure

9

CD box

(pearlite plade)

180

60-80

1. The Paper should touch the transferring side well.

2.Choosing“Mirror Effect” when printing

3. With more pressure

10

Double-side cigaret kasse

(pearlite plade)

180

60-80

1. The Paper should touch the transferring side well.

2.Choosing“Mirror Effect” when printing

3. With more pressure

11

Lighter

180

180-200

1. The picture can be transferred on both sides of the lighter as you like. The Paper should touch the transferring side well.

2.Choosing“Mirror Effect” when printing

3. With moderate pressure

4. The size of paper should cover lighter well enough. The picture side should face the silicon pad (Reverse Transferring)

12

Puzzle spil plade

180

60-80

1. The Paper should touch the transferring side well.

2.Choosing“Mirror Effect” when printing

3.With more pressure

13

Rum flaske

180

15-30

1. Keep the picture height within 10 cm.

2.With less pressure

3.Keep the bottle cap open when transferring.

4.Choosing“Mirror Effect” when printing.